1. Device Overview

The DermaPal is a hand-held phototherapy device for targeted UV treatment of psoriasis, vitiligo, and eczema on all skin types (I–VI). The device uses a digital timer and is available with UVA, Narrowband UVB, or Broadband UVB lamps. It is compact, easy to use, and designed for both home and clinical settings. For safety and optimal outcomes, always follow physician instructions and use as prescribed:contentReference[oaicite:0]{index=0}.

2. Indications for Use

For the treatment of psoriasis, vitiligo, and atopic dermatitis (eczema) on all skin types, under the direction of a physician:contentReference[oaicite:1]{index=1}.

3. Safety & Warnings

• Prescription Use Only: Federal law restricts this device to sale by or on the order of a physician:contentReference[oaicite:2]{index=2}.
• Always wear provided UV-blocking goggles during treatment. Anyone in view of the device must use Daavlin-approved eyewear.
• Cover untreated skin (face, neck, ears) with SPF 30+ sunscreen.
• Do not use if you are taking photosensitizing drugs (e.g., psoralens) unless specifically instructed by your physician.
• DANGER – Ultraviolet Radiation: Overexposure can cause skin burns, eye injury, or increase risk of skin cancer. Never exceed prescribed times:contentReference[oaicite:3]{index=3}.
• Keep device out of reach of children and pets. Never use if damaged or near water.
• Never treat over skin eruptions, burns, or wounds without physician approval.
• Always inspect cord, goggles, and timer before use.
• Do not use the device for any purpose other than that prescribed by your physician:contentReference[oaicite:4]{index=4}.

4. Unpacking & Assembly

1. Inspect the shipping box and device for damage. If damaged, notify Daavlin and the carrier within 24 hours:contentReference[oaicite:5]{index=5}.
2. Remove the DermaPal from the box and plug into a matching household outlet (check voltage/frequency label).
3. No assembly is required; the device is ready for use.
4. Gather necessary accessories: goggles, comb (for scalp), sunscreen, treatment log, and physician’s instructions.

5. Operating Instructions

1. Put on UV-blocking goggles. Apply SPF 30+ sunscreen to untreated skin as directed.
2. Install the comb attachment for scalp treatment, if needed (see below).
3. Remove the treatment wand from the base.
4. Enter the prescribed treatment time using the timer and physician’s instructions.
5. Hold the lamp over the affected area at ~1.25 in (3.18 cm) distance. The comb helps maintain proper spacing.
6. Turn on the lamp (press Start/Pause) and treat the area for the set time. The lamp will turn off automatically.
7. If treating another area, repeat with the same or adjusted time.
8. After the lamp turns off, record your treatment and clean the device before storage.
9. Never take more than one treatment per day. Never treat more often than every 12 hours:contentReference[oaicite:6]{index=6}.

6. Digital Timer & Security Code

• Security Code: To unlock, enter 0007 using the up/left buttons and confirm with Start/Pause:contentReference[oaicite:7]{index=7}.
• Enter treatment time in MM:SS using the buttons; maximum is 29:59 minutes.
• The timer stores your last setting for repeat treatments.
• For devices with FlexRx™: When exposures are depleted, a code "Cxyz" will display. Contact your physician for a refill code and enter it as you would the security code.

7. Using the Comb Attachment

• Installing: Slide the comb over the wand, aligning the comb’s openings with the lamp surface. The comb can be used to part hair for scalp treatments and to maintain a consistent distance from the skin.
• Removing: Slide the comb off the wand when not needed. Clean after each use with 70% isopropyl alcohol or 1:3 bleach solution; rinse and dry thoroughly:contentReference[oaicite:8]{index=8}.

8. Cleaning & Maintenance

• Unplug the device before cleaning.
• Wipe plastic and lamp surfaces with 70% isopropyl alcohol or 1:3 bleach solution on a soft, non-abrasive cloth.
• Do not use paper towels or immerse the device in liquid. Never apply liquid directly to the wand.
• Clean goggles and comb between uses; soak in disinfectant if needed, rinse and dry well.
• Replace lamps after ~200-250 hours (UVB) or ~400-500 hours (UVA), or if output drops. Contact Daavlin for replacement:contentReference[oaicite:9]{index=9}.

9. Frequently Asked Questions

• How do I unlock the device? Enter security code 0007 when prompted, using the up/left and Start/Pause buttons:contentReference[oaicite:10]{index=10}.
• What goggles should I use? Only Daavlin-approved UV-blocking goggles, for anyone in the room during treatment.
• What if I miss a treatment? Resume as prescribed. Never treat more than once a day or less than 12 hours apart.
• How do I record treatments? Use the log sheet included in the manual (see last page) to track date, time, and duration:contentReference[oaicite:11]{index=11}.
• Can I treat the scalp? Yes, use the comb to part hair and ensure even exposure.
• How do I order replacement lamps or service? Contact Daavlin: 1-800-322-8546 or service@daavlin.com.
• What do I do if the device shows a “Cxyz” code? Contact your physician for a FlexRx™ refill code and enter as described above.

10. Warranty & Support

• Device warranty: 1 year (new), 90 days (remanufactured), 90 days (lamps):contentReference[oaicite:12]{index=12}.
• Contact Daavlin:
  • Phone: 1-800-322-8546
  • Email: service@daavlin.com
  • Website: www.daavlin.com